Throttle Lever; Front Brake Lever; Rear Brake Lever - Can-Am DS 250 Operator's Manual

While reading this Operator's Guide, remember that:
Indicates a potential hazard that, if not avoided, could result in serious in-
jury or death.
NOTE: This section gives basic func-
tions of the various controls of your ve-
hicle. For more details of how to op-
erate one control in conjunction with
some others, refer to OPERATING IN-
STRUCTIONS further in this section.

1) Throttle Lever

Located on the right side of handlebar.
When pushed, it increases the engine
speed that allows the engagement of
the transmission on the selected gear.
When released, the engine speed
should return automatically to idle and
the vehicle will gradually slow down.
vmo2006-014-008_a
1. Throttle lever
2. To accelerate
3. To decelerate

2) Front Brake Lever

Located on the right side of handlebar.
When compressed, the front brakes
are applied. When released, it should
automatically return to its original posi-
tion. Braking effect is proportional to
the force applied on the lever and to
the type and condition of the terrain.
______________________
64
WARNING
vmo2006-014-009_a
1. Brake lever
2. To apply brake

3) Rear Brake Lever

Located on the left side of handlebar.
When compressed, the rear brake is
applied. When released, it should au-
tomatically return to its original posi-
tion. Braking effect is proportional to
the force applied on the lever and to
the type and condition of the terrain.
vmo2006-014-053_a
1. Brake lever
2. To apply brake