Table of Contents
Advertisement
Detach throttle cable from the throttle body cam.
vmr2008-029-014_a
1. Cable barrel
Unscrew the cable from throttle body.
vmr2008-029-015_a
1. Cable screwed connection
Cut all locking ties retaining throttle cable to frame.
Remove the throttle cable from the vehicle noting
its correct routing.
Throttle Cable Installation
The installation is the reverse of the removal pro-
cedure.
Proceed with throttle cable adjustment.
Throttle Cable Adjustment
Slide rubber protector back to expose throttle ca-
ble adjuster.
vmr2008-029
Section 08 CHASSIS
Subsection 02 (STEERING)
vmr2008-029-009_a
1. Rubber protector
Loosen lock nut then turn the adjuster to obtain
correct throttle lever free play.
vmr2008-029-010_a
1. Lock nut
2. Throttle cable adjuster
3. Rubber protector
NOTE: Measure throttle free play at the tip of
throttle lever.
vmo2008-011-001_c
1. Throttle lever
A. 2 to 4 mm (5/64 to 5/32 in)
Tighten lock nut and reinstall the rubber protector.
Turn handlebar side to side and ensure there is still
free-play in each position.
297
Advertisement
Table of Contents
Troubleshooting
