Can-Am DS 450 2008 Shop Manual page 316

Section 08 CHASSIS
Subsection 02 (STEERING)
vmr2008-029-008_a
1. Cover screws
Slide rubber protector back to expose the throttle
cable adjuster.
vmr2008-029-009_a
1. Rubber protector
Loosen the lock nut.
Screw the adjuster completely.
vmr2008-029-010_a
1. Lock nut
2. Throttle cable adjuster
3. Rubber protector
Remove cable from the throttle lever.
296
vmr2008-029-011_a
1. Throttle cable end
2. Throttle lever
At Throttle Body
Remove front body assembly. Refer to
section.
Remove the air intake hose deflector.
vmr2008-029-016_a
1. Deflector
2. Air intake hose
Loosen throttle body clamps.
Turn the throttle body to reach the throttle body
cover screw.
vmr2008-029-013_a
1. Throttle body cover screw
2. Air intake inlet hose
Remove the throttle body cover.
BODY
vmr2008-029