Can-Am DS 450 2008 Shop Manual page 41

vmr2008-009-100_a
1. Intake adapter screws
2. Throttle body
Remove the LH lower protector.
vmr2008-009-101_a
1. LH lower protector
Remove the shock absorber upper bolt.
vmr2008-009-033_a
1. Shock absorber upper bolt
Remove screws securing the LH side member.
Remove the LH side member from the vehicle.
vmr2008-009
Subsection 01 (ENGINE REMOVAL AND INSTALLATION)
vmr2008-009-016_a
SCREW BEHIND SHOCK ABSORBER
1. Side member front screw
vmr2008-009-017_a
1. Side member rear screws
2. Side member
Cut all locking ties holding wiring harness to upper
bar of frame.
Remove screws securing headlamps regulator.
vmr2008-009-018_a
1. Headlamp regulator screws
Remove the ground wire from starter.
Section 03 ENGINE
21