Can-Am DS 450 2008 Shop Manual page 369

Section 08 CHASSIS
Subsection 05 (BRAKES)
vmr2008-033-061_a
1. Brake hose
2. Caliper recess
3. Front caliper
After front brake hoses installation, turn handlebar
fully right and fully left to be sure that the brake
hose does not rub against wheel hub or suspen-
sion arm. Also remove the shock absorbers and
move the suspension up and down. If brake hose
rubs on any parts, reroute brake hose correctly.
BRAKE
Fill and bleed the brake system. Refer to
FLUID BLEEDING
in this section.
Install all other removed parts.
Check for leaks and make sure the brakes operate
normally before driving.
349
vmr2008-033