Rear Bumper; Engine Skid Plate; Rear Fender Installation - Can-Am DS 450 2008 Shop Manual

Section 08 CHASSIS
Subsection 06 (BODY)
vmr2008-035-023_a
1. Battery
2. Fuse holder
3. Fascia screws
Remove screws retaining rear fender to footrest
and fascia to frame.
vmr2008-035-024_a
Remove bolts securing rear fender to its support.
CAUTION: Attach muffler to fender support to
avoid damaging exhaust system.
vmr2008-035-025_a
1. Muffler bolt
2. Rear fender support

Rear Fender Installation

Installation is the reverse order of removal.

REAR BUMPER

Rear Bumper Removal
From underneath of rear fender, remove screws
retaining rear bumper.
360
Rear Bumper Installation
Installation is the reverse order of removal.
NOTE: Install all bolts before torquing.

ENGINE SKID PLATE

DS 450 X
Skid Plate Inspection
The skid plate protects the engine and the frame.
Check for damage, cracks or looseness.
Change if skid plate is damaged or cracked.
Skid Plate Removal
Underneath vehicle, remove screws retaining skid
plate to frame.
vmr2008-035-026_a
1. Skid plate
2. Bolts to be removed
3. Nerf bar
Remove the lower bolt securing the front bumper.
vmr2008-035-027_a
1. Front bumper
2. Skid plate
3. Lower bolt of bumper
Skid Plate Installation
Installation is the reverse of the removal.
NOTE: Install all bolts before torquing.
vmr2008-035