Table of Contents
Advertisement
Section 08 CHASSIS
Subsection 04 (REAR SUSPENSION)
vmo2008-011-076_a
PRELOAD ADJUSTMENT
Step 1:
Loosen top locking ring
Step 2:
Turn adjusting ring accordingly
Step 3:
Tighten top locking ring
Shock compression and Rebound
Adjustment
Perform adjustments one position (click) at a time.
Test run the vehicle under the same conditions;
trail, speed, driver riding position, etc. Proceed
methodically until you are satisfied.
Compression Damping
Turning the compression adjuster clockwise (H)
increases shock damping action (stiffer).
Turning the compression adjuster counterclock-
wise (S) decreases shock damping action (softer).
vmo2008-011-060_a
1. Compression adjuster (use a flat screwdriver)
Rebound Damping
Turning the rebound adjuster clockwise (H) in-
creases shock damping action (stiffer).
Turning the rebound adjuster counterclockwise (S)
decreases shock damping action (softer).
320
vmo2008-011-077_a
1. Rebound adjuster (flat screwdriver)
MAINTENANCE
LUBRICATION
Lubricate bell crank lever and pivot arm with sus-
pension grease (P/N 293 550 033).
vmr2008-031-027_a
BELL CRANK LEVER
1. Grease fittings
vmo2009-005-008_a
PIVOT ARM
1. Grease fitting
vmr2008-031
Advertisement
Table of Contents
Troubleshooting
