Front Sprocket - Can-Am DS 450 2008 Shop Manual

Section 07 DRIVE SYSTEM
Subsection 01 (DRIVE CHAIN/REAR AXLE)
Position wires from indicator switches on front
sprocket protector before installing it.
vmr2008-032-010
Adjust drive chain. Refer to
JUSTMENT
for the proper procedure.

FRONT SPROCKET

Front Sprocket Removal
Loosen drive chain. Refer to
MOVAL for the procedure.
Remove front sprocket protector.
vmr2008-032-007_a
1. Protector screws
2. Brake pedal
Remove chain guard.
276
DRIVE CHAIN AD-
DRIVE CHAIN RE-
vmr2008-032-008_a
1. Chain guard
Remove and discard circlip at the center of front
sprocket.
vmr2008-032-034_a
1. Circlip
Remove front sprocket and chain from engine out-
put shaft.
Remove front sprocket from chain.
Front Sprocket Inspection
Check front sprocket for:
– Distortion
– Excessive wear
– Other damages.
vmr2008-032