Throttle Lever; 2Wd/4Wd Selector - Can-Am MAX 400 EFI Operator's Manual

vmo2006-016-001_d
vmo2008-019-005_d
vmo2008-016-007_a
NOTE: This section gives basic func-
tions of the various controls of your ve-
hicle. For more details of how to op-
erate one control in conjunction with
some others, refer to OPERATING IN-
STRUCTIONS further in this section.

1) Throttle Lever

When pushed, it increases the engine
speed that allows the engagement of
the transmission on the selected gear.
______________________
72
When released, the engine speed
should return automatically to idle and
the vehicle will gradually slow down.
vmo2008-019-005_a
TYPICAL
1. Throttle lever
2. To accelerate
3. To decelerate

2) 2WD/4WD Selector

This selector allows to choose be-
tween 2WD and 4WD when the vehi-
cle is stopped.
vmo2008-019-005_b
TYPICAL
1. Selector
2. 2WD position
3. 4WD position
CAUTION: The vehicle must be
stopped to engage or disengage
2WD/4WD selector.
damage may occur if selector is en-
gaged or disengaged while driving.
CAUTION: If the rear wheels are
spinning, release the throttle and
wait engine return to the idle before
selecting the 4WD mode.
Mechanical