Can-Am DS 450 2008 Shop Manual page 44

Section 03 ENGINE
Subsection 01 (ENGINE REMOVAL AND INSTALLATION)
vmr2008-009-031
Install spacers with the cut bolts.
vmr2008-009-032_a
1. Short spacer in front
2. Long spacer at the bottom
Route oil hoses underneath the front of engine.
Insert the bottom of engine into the lower brace
of frame.
Position engine in frame.
On RH side, plug the CTS connector.
Install front and lower engine bolts.
NOTE: Install all other bolts retaining engine be-
fore tightening them.
Install a NEW air intake adapter seal.
Install a NEW front sprocket circlip.
Use a NEW O-ring when installing oil tank outlet
fitting. Apply engine oil on O-ring.
Install all other removed parts.
24
vmr2008-009