Clutch; Clutch Removal - Can-Am DS 450 2008 Shop Manual

vmr2008-017-015_a
1. Retaining plate
2. Bearing
3. Thrust hub
Clutch Spring
Measure each clutch spring free length.
CLUTCH SPRING FREE LENGTH
NEW
SERVICE LIMIT
vmr2008-017-016
Retaining Plate and Clutch Spring
Installation
For installation, reverse the removal procedure.
CLUTCH ADJUSTMENT
Perform the
dure at the beginning of this section.

CLUTCH

Clutch Removal

Remove RETAINING PLATE AND CLUTCH
SPRINGS , see procedure above in this section.
vmr2008-017
33.70 to 34.50 mm
(1.327 to 1.358 in)
31.60 mm (1.244 in)
, see proce-
Subsection 09 (CLUTCH)
Using the clutch spanner (P/N 529 035 647) and a
27 mm socket, remove clutch hub nut and spring
washer.
vmr2008-017-017_a
1. Clutch spanner
2. Clutch hub nut
3. Spring washer
Install a clutch spring using a retaining plate screw
with an appropriate washer.
vmr2008-017-050_a
1. Clutch spring
2. Washer
3. Retaining plate screw
Withdraw clutch hub assembly.
Section 03 ENGINE
141