State Monitoring Interface; Motor Parameter Autotuning; Parameter Autotuning Operation Diagram - INVT Goodrive350 Series Operation Manual

Goodrive350 series high-performance multi-function inverter
16:02:35 Forward
Local Ready
P00.00: Speed control mode
P00.01: Running command channel
P00.02: Communication command channel
P00.03: Max. output frequency
P00.04: Upper limit of running frequency
P00.05: Lower limit of running frequency
Return Add
In parameter selection edit interface, the "authority" on the top right indicates whether this parameter
can be modified or not.
"√" indicates the set value of this parameter can be modified under current state.
"×" indicates the set value of this parameter cannot be modified under current state.
"Current value" indicates the value saved last time.
"Default value" indicates the default value of this parameter.

5.4.7 State monitoring interface

In the fourth-level menu of "state monitoring/fault record" menu, press
key to enter state monitoring interface. After entering state monitoring interface, the current parameter
value will be displayed in real time, this value is the actually detected value which cannot be modified.
In state monitoring interface, press
16:02:35 Forward
P17.00：Set frequency
P17.01: Output frequency
P17.02: Ramps reference frequency
P17.03: Output voltage
P17.04: Output current
P17.05: Motor speed
Return

5.4.8 Motor parameter autotuning

In "Motor parameter autotuning" menu, press
parameter autotuning selection interface, however, before entering motor parameter autotuning
interface, users must set the motor nameplate parameters correctly. After entering the interface,
select motor autotuning type to carry out motor parameter autotuning. In motor parameter autotuning
interface, press
16:02:35
Forward Local Ready
Common parameter setup
Parameter setup
State monitoring/fault record
Motor parameter autotuning
Parameter backup
System setup
Return Homepage
01: GD350 Current value：50.00
Max. output frequency
Max. value: 630.00
Min. value: 50.00
Default value: 50.00
Return
Select
Fig 5.14 Parameter setup edit interface
Local Ready 01: GD350
Add
Select
Fig 5.15 State monitoring interface
key or key to return to the previous menu.
16:02:35
01: GD350
Ensure motor nameplate parameters are set
correctly!
Return
Select
Fig 5.16 Parameter autotuning operation diagram
Authority: √
Hz
050.00
Homepage
Confirm
key or key to return to the previous menu.
16:02:35
Setting frequency
Max. value: 630.00
Min. value: 0.0
Default value: 0.0
Return
key, key or
Forward Local Ready 01: GD350
Add
Confirm
-46-
Current value：50.00
Max. output frequency
050.01
Max. value: 630.00
Min. value: 50.00
Default value: 50.00
Return Homepage
key,
Forward Local Ready 01: GD350
Hz
50.00
Homepage
Confirm
key to enter motor
16:02:35 Forward
Complete parameter rotary autotuning
Complete parameter static autotuning
Partial parameter static autotuning
Return
Chapter 5
Authority: √
Hz
Confirm
key or
Local Ready 01: GD350
Homepage
Confirm