INVT Goodrive350 Series Operation Manual page 161

Goodrive350 series high-performance multi-function inverter
Function
Name
code
Lower limit of
P06.17
AO1 output
Corresponding
P06.18 AO1 output of
lower limit
Upper limit of
P06.19
AO1 output
Corresponding
P06.20 AO1 output of
upper limit
AO1 output filter
P06.21
time
P06.22– Reserved
P06.26 variables
Lower limit of
P06.27
HDO output
Corresponding
P06.28 HDO output of
lower limit
Detailed parameter description
21: Reserved
22: Torque current (bipolar, 100% corresponds to
10V)
23: Exciting current (100% corresponds to 10V)
24: Set frequency (bipolar)
25: Ramps reference frequency (bipolar)
26: Running speed (bipolar)
27: Reserved
28: C_AO1 from CODESYS (set P27.00 to 1)
29: C_AO2 from CODESYS (set P27.00 to 1)
30–47: Reserved
Above function codes define the relation between
output value and analog output. When the output
value exceeds the set max./min. output range, the
upper/low limit of output will be adopted during
calculation.
When analog output is current output, 1mA
corresponds to 0.5V voltage. In different
applications, 100% of output value corresponds to
different analog outputs.
10V (20mA)
AO
0.0%
Setting range of P06.17: -100.0%–P06.19
Setting range of P06.18: 0.00V–10.00V
Setting range of P06.19: P06.17–100.0%
Setting range of P06.20: 0.00V–10.00V
Setting range of P06.21: 0.000s–10.000s
0–65535
-100.0%–P06.29
0.00–50.00kHz
-156-
Default
0.00V
100.0%
10.00V
100.0%
0.000s
0.00%
0.00kHz
Chapter 6
Modi
value fy
0.0%
○
○
○
○
○
0
●
○
○