INVT Goodrive350 Series Operation Manual page 167

Goodrive350 series high-performance multi-function inverter
Function
Name
code
time 2
Acceleration
P08.02
time 3
Deceleration
P08.03
time 3
Acceleration
P08.04
time 4
Deceleration
P08.05
time 4
Running
P08.06 frequency of
jogging
Acceleration time
P08.07
of jogging
Deceleration time
P08.08
of jogging
P08.09 Jump frequency 1 When the set frequency is within the range of jump
Jump frequency
P08.10
amplitude 1
P08.11 Jump frequency 2
Jump frequency
P08.12
amplitude 2
P08.13 Jump frequency 3
Jump frequency
P08.14
amplitude 3
Amplitude of
P08.15
wobbling
Detailed parameter description
selected by multi-function digital input terminal (P05
group). The acceleration/deceleration time of the
inverter is the first group by default.
Setting range: 0.0–3600.0s
This function code is used to define the reference
frequency of the inverter during jogging.
Setting range: 0.00Hz–P00.03 (max. output
frequency)
Jogging acceleration time is the time needed for the
inverter to accelerate from 0Hz to max. output
frequency (P00.03).
Jogging deceleration time is the time needed from
decelerating from the max. output frequency
(P00.03) to 0Hz.
Setting range: 0.0–3600.0s
frequency, the inverter will run at the boundary of
jump frequency.
The inverter can avoid mechanical resonance point
by setting the jump frequency, and three jump
frequency points can be set. If the jump frequency
points are set to 0, this function will be invalid.
Set frequency f
Jump
frequency 3
Jump
frequency 2
Jump
frequency 1
Setting range: 0.00Hz–P00.03 (max. output
frequency)
0.0–100.0% (relative to set frequency)
-162-
1/2* jump amplitude 3
1/2* jump amplitude 3
1/2* jump amplitude 2
1/2* jump amplitude 2
1/2* jump amplitude 1
1/2* jump amplitude 1
Time t
Chapter 6
Default Modi
value fy
on model
Depend
○
on model
Depend
○
on model
Depend
○
on model
Depend
○
on model
5.00Hz
○
○
Depend
on model
○
0.00Hz
○
0.00Hz
○
0.00Hz
○
0.00Hz
○
0.00Hz ○
0.00Hz
○
○
0.0%