E-Mail Setup - Tidal Engineering Synergy Series Technical Manual

19.2.1 E-Mail Setup

Synergy Controller Technical Manual, Revision H
Open the Ethernet Network Folder in the
Comm screen and select the E-Mail folder.
Note that some screens have been reorganized
in version 3.0.7 and may be a different on older
versions.
Open the Setup Folder as shown at left.
Enable the E-Mail Feature and set the following
parameters to identify your system:
From E-Mail Name
From E-Mail Address
Note that these parameters don't usually need
to be actual names or e-mail addresses. They
should be set so controller messages can be
identified by the recipient
Enable the E-Mail Alarms parameter if you want
the controller to send notifications regarding
alarm conditions to your e-mail or mobile phone
(text messaging)
Page 307