Software Upgrade Procedures - Tidal Engineering Synergy Series Technical Manual

7.5.1 Software Upgrade Procedures

The Synergy Micro 2 upgrade is delivered in a compressed format and is installed using a USB Flash Disk.
The delivered file name contains the Version and Build number.
For example: SYNERGY_MICRO_2_VERSION_3_0_7_Build_893u is version 3.0.7 Build 893u.
The Synergy Controller Configuration Backup and Restore features should be used to backup settings
before performing the upgrade. In addition, you may want to manually record your Cascade and Web Server
registration keys, if your chamber employs those features, as well as the Chamber Type so these can be
restored after the installation.
To install the upgrade:
1. Backup settings and record registrations and chamber configuration.
2. Install the new software.
3. Load chamber configuration and restore non-standard settings and registration keys.
Step 1. Backup Settings
Synergy Controller Technical Manual, Revision H
Browse to the Maintenance Screen \File
Utilities\Config Utilities folder and open the
Backup Settings Folder.
From the Maintenance Screen \File
Utilities\Config Utilities\Backup Settings
folder Press the Browse button.
Page 103