Comm Screen; Communications Folder; 118 - Tidal Engineering Synergy Series Technical Manual

8.0 COMM SCREEN

The Synergy Controller supports an extensive command that can be used to control and monitor the
chamber. For Example, to query the temperature of the chamber, send the query "? C1". The chamber will
respond with "25.0 C". To view the complete Synergy Controller's command set go to Appendix A Synergy
Controller Communications Command Set.

8.1 Communications Folder

8.2 RS-232
Synergy Controller Technical Manual, Revision H
Communications Folder
Select the following communication functions.
♦ RS - 232
♦ RS - 485
♦ IEEE - 488
♦ Ethernet Network
RS - 232
RS-232 communications are standard on all
Synergy Controller configurations. The settings
shown at left are read only and cannot be changed.
The RS–232 port may be used with third party test
and measurement software such as LabVIEW,
Tidal Engineering's Synergy Manager or Tidal
Engineering's SimpleComm. The Synergy
Manager PC based monitor and control software
and SimpleComm are discussed in
Communications: Software
Section 17.4
Applications.
Page 118