119; Ieee 488 / Gpib; Ethernet Network - Tidal Engineering Synergy Series Technical Manual

8.3 RS-485

8.4 IEEE 488 / GPIB

8.5 Ethernet Network

Synergy Controller Technical Manual, Revision H
RS – 485
When the RS-485 Mode is set to User Comms the
RS – 485 port may be used with third party test and
measurement software such as LabVIEW, Tidal
Engineering's Synergy Manager or Tidal
Engineering's SimpleComm.
When the RS-485 Mode is set to UUT sensors, the
RS-485 port monitors Synergy UUT thermocouple
modules. UUT Modules are discussed in detail in
Section 14.4 UUT Module.
IEEE 488/ GPIB
The IEEE 488 port may be used with third party
test and measurement software such as LabVIEW,
Tidal Engineering's Synergy Manager or Tidal
Engineering's SimpleComm.
Ethernet Network
The Ethernet Network interface support s a number
of powerful communications tools.
•
WebTouch Remote™ Web Server
•
FTP Server
•
E-mail
•
Network Printing
In addition, the Ethernet Network interface may be
used with third party test and measurement
software such as LabVIEW, Tidal Engineering's
Synergy Manager or Tidal Engineering's
SimpleComm. The Synergy Manager PC based
monitor and control software and SimpleComm are
discussed in Section 17 Communications: Software
Applications.
Page 119