Alarm Logging - Tidal Engineering Synergy Series Technical Manual

14.5 Alarm Logging

The Synergy Controller logger captures Alarms even if logging is disabled.
When an alarm occurs it generates a message record.
For example "Ch 1 High 500.00 C" is in the last field of the record as shown below:
08/27/2013 16:54:39,M,C,500.0,100.0,500.0,30.0,Ch 1 High
08/27/2013 16:55:07,M,C,500.0,100.0,500.0,30.0,Ch 1 High
Note the record type field following the Date/Time record contains M in the records above.
Synergy Controller Technical Manual, Revision H
500.00 C
500.00 C
Page 172