Abort Subsystem; Abort:transient - Keysight U2722A Programmer's Reference Manual

3

ABORt Subsystem

ABORt:TRANsient

Syntax
ABORt:TRANsient (@<ch>)
This command cancels any transient trigger actions and returns the transient
trigger state back to idle. It also resets the WTG transient bits in the Operation
Condition Status register.
Parameter
Item
<ch>
Remark
These commands are executed at power-on and upon execution of *RST.
Example
ABOR:TRAN (@1)
28
Type Range of values
NR1 1 through 3
Defaul t value
Required parameter
Keysight U2722A/U2723A Programmer's Reference