Table of Contents
Advertisement
Keysight PXIe Vector Network Analyzers
M937xA
Startup Guide
1
Getting Started
Introduction
The scope of this Startup Guide is to detail the processes of receiving and
installing the network analyzer module and cables that compose the Keysight
M937xA PXIe Vector Network Analyzer module. Additionally, installing the
required software and verifying network analyzer module operation is
documented. If you have any questions after reviewing this information, please
contact your local Keysight Technologies Inc. representative or contact us
through our support Website at
http://www.keysight.com/techicalsupport/main.
Related Documentation
You can find all M937xA PXI network analyzer module documentation and
other resources at:
or at the respective product pages on www.keysight.com (go to Document
Library > Manuals).
STEP 1. Unpack and Inspect the Network Analyzer Modules
The network analyzer modules are shipped in materials which prevent
damage from static. The modules should only be removed from the
packaging in an anti-static area ensuring that correct anti-static
precautions are taken. Store all modules in anti-static envelopes when not
in use.
Electrostatic discharge (ESD) can damage or destroy electronic components.
Use a static-safe work station to perform all work on electronic assemblies.
Figure 1-1 on page 6
protection: conductive table-mat and wrist-strap combination, and conductive
floor-mat and heel-strap combination. Both types, when used together,
provide a significant level of ESD protection. Of the two, only the table-mat and
http://na.support.keysight.com/pxi/help
shows a static-safe work station using two types of ESD
5
Advertisement
Table of Contents
