MR ECOTAP VPD CONTROL PRO Operating Instructions Manual page 9

1 Introduction
1.4.1.1 Warning relating to section
WARNING
1.4.1.2 Embedded warning information
1.4.1.3 Signal words and pictograms
Maschinenfabrik Reinhausen GmbH 2018
Warnings relating to sections refer to entire chapters or sections, sub-sec-
tions or several paragraphs within this technical file. Warnings relating to
sections use the following format:
Type of danger!
Source of the danger and outcome.
► Action
► Action
Embedded warnings refer to a particular part within a section. These warn-
ings apply to smaller units of information than the warnings relating to sec-
tions. Embedded warnings use the following format:
DANGER! Instruction for avoiding a dangerous situation.
The following signal words are used:
Signal word Definition
DANGER Indicates a hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING Indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION Indicates a hazardous situation which, if not avoided, could result
in minor or moderate injury.
NOTICE Indicates measures to be taken to prevent damage to property.
Table 1: Signal words in warning notices
Pictograms warn of dangers:
Pictogram Definition
Warning of a danger point
Warning of dangerous electrical voltage
5252433/02 EN
® ®
ECOTAP VPD CONTROL PRO 9