MR ECOTAP VPD CONTROL PRO Operating Instructions Manual page 164

® ®
164 ECOTAP VPD CONTROL PRO
5. Press Display to call up the measured value display (data log).
Figure 102: Data log
The operation described below is only possible if you access the visualiza-
tion using a computer.
6. Move the mouse pointer to a measurement point for more information.
7. Use the mouse to produce a selection window or turn the mouse wheel to
zoom into or out of the diagram. If necessary, you can move an enlarged
diagram with the right mouse button.
8. Press to save the displayed measured values as a csv file.
5252433/02 EN
8 Operation
Maschinenfabrik Reinhausen GmbH 2018