Wiring The Ui Assembly - MR ECOTAP VPD CONTROL PRO Operating Instructions Manual

NOTICE
® ®
54 ECOTAP VPD CONTROL PRO
3. Optional: Connect the ETH 1 interface to the control system (SCADA) in
accordance with the connection diagram.
Figure 39: SCADA connection

6.5.6 Wiring the UI assembly

Damage to the device due to incorrect current transformer con-
nection
Connecting a grounded current transformer can lead to inadmissibly high
EMC loads, causing damage to the UI assembly.
► Do not ground the current transformer.
5252433/02 EN
6 Mounting
Maschinenfabrik Reinhausen GmbH 2018