Configuring Events - MR ECOTAP VPD CONTROL PRO Operating Instructions Manual

8 Operation

8.14.2 Configuring events

Maschinenfabrik Reinhausen GmbH 2018
Acknowledging events
Acknowledgeable events must be acknowledged in the event overview so
that they are no longer displayed. All other events are automatically removed
once the cause is remedied (e.g. limit value no longer infringed).
To acknowledge the events, proceed as follows:
► To acknowledge the events, highlight the desired events in the
then press the Acknowledge button.
ð The events are acknowledged.
The events have the following properties:
Property
Event status
High active
(not configurable)
Can be set multiple
times
(not configurable)
Acknowledgeable
(not configurable)
Event name
Event description
Event remedy
Category
Message
Storage
Table 52: Properties of events
5252433/02 EN
Description
Active: Event active.
Inactive: Event not active.
High active: The device issues a signal if the event is ac-
tive.
Low active: The device issues a signal for as long as the
event is not active. If the event is active, the signal is re-
set.
The event can be triggered several times without having
been deactivated in the meantime.
Acknowledgeable events must be acknowledged in the
event overview so that they are no longer displayed. All
other events are automatically removed once the cause is
remedied (e.g. limit value no longer infringed).
Brief name of event. If you delete all of the text, the stan-
dard text is displayed.
Description of event. If you delete all of the text, the stan-
dard text is displayed.
Troubleshooting information for cause of event. If you
delete all of the text, the standard text is displayed.
▪ Error (red)
▪ Warning (yellow)
▪ Info (grey)
This setting affects the color of the Alarm LED and the
event symbol in the primary navigation.
If you activate this option, the event is shown on the dis-
play and, if configured accordingly, issued via an output
and the control system protocol.
If you activate this option, the event is stored in the event
memory.
ECOTAP
column
® ®
VPD CONTROL PRO 151