Abus SECVEST FUAA50 Series Installer Manual page 65

Delete All
Remove
Partitions
Add indoor sounder (alarm panel)
1. Select Indoor sounder.
2. Select Add/Del.
3. Select the corresponding indoor sounder.
4. Trigger the tamper contact of the indoor sounder.
Note
When an indoor sounder has been taught in, the
wireless alarm panel beeps twice to confirm.
A message appears on the display to confirm that
the indoor sounder was added, and the value for
the received signal strength is shown.
5. Exit the entry with Back.
Note
If an indoor sounder has been taught in, the sym-
bol appears next to the indoor signal generator
number on the alarm panel display
A maximum of 4 indoor sounders can be added
6. Exit this display with Back.
The following course of action is the same as is described for the alarm panel's
menu guidance below.
Click on this field and in the next step confirm the security prompt to delete all in-
door sounders.
Click on this field and in the next step confirm the security prompt to delete this in-
door sounder.
Numbers of the partitions to which the indoor sounder is assigned.
Edit
Select the corresponding indoor sounder.
The following sub-menu items appear.
Name:
Assign a unique name for this indoor sounder.
Delete All
1. Select Delete All.
2. Confirm the selection with Next.
3. Confirm the security prompt with Yes to delete all in-
door sounders. Select Back if you are not sure.
Configuration
65