Abus SECVEST FUAA50 Series Installer Manual page 156

Configuration
SIP Dialler Enable
RFC 2833 DTMF Detec-
tion
Note
The alarm control panel works through the communication types in the following order:
1st ARC/ESCC reporting
2. Email
3rd Social care (protocol transmission)
4. SMS via GSM
5. Voice dialler
6. SMS via PSTN
Push notifications are independent of this sequence and may occur at any time.
156
sipgate.de is the individual SIP service provider, as SIP
server name
ID, if the recipient has an account with the same SIP service pro-
vider
9876543@sipgate.de
Enabled
The SIP dialler is enabled.
Deactivated
Enabled
DTMF tones are also detected for SIP under certain requirements.
Deactivated
No detection of DTMF tones.
-
-