Abus SECVEST FUAA50 Series Installer Manual page 281

DC-09
Note
The provisions of the following document apply here.
ANSI/SIA DC-09-2013: Internet Protocol Event Reporting
SIA Digital Communication Standard – Internet Protocol
Event Reporting
S/W <= v3.00.03 Messages are sent without encryption (unencrypted).
S/W >= v3.00.03 Messages can also be sent with encryption.
The alarm control panel automatically uses the IP-based protocol DC-09 if the alarm control panel uses Ethernet
(LAN) as an outgoing communication path.
In doing so, the data from traditional protocols are packed into IP packages and transferred.
Note:
Details can be found in the DC-09 and DC-07 specification from SIA and in the corresponding standards that
are mentioned in these documents.
The tokens used are:
Protocol
FF
CID
SIA 1, SIA 2, SIA 3, Ex SIA 3,
Ex SIA 3 V2, Ex SIA 3 V3
TCP
The TCP internet protocol is used for the transmission.
Note
TCP uses port 9999.
If it is not possible to send messages, it may be that the firewall has also blocked various outgoing ports. Therefore,
check the firewall settings on the router/IAD.
Information on implementation in the Secvest with reference to chapter 5.5.1 "Event Messages (PE)" of the CD-09
specification.
Contents
LF
CRC
0LLL
ID
Seq
Rrcvr
Receiver num-
ber
Token
"SCN-S8"
"ADM-CID"
"SIA-DCS"
Chapter Use in the Secvest
DC-09
Specifica-
tion
5.5.1.1 Yes
5.5.1.2 Yes
5.5.1.3 Yes
5.5.1.4 Yes
5.5.1.5 Yes
5.5.1.6.3 No
Definition
Scancom 4-8-1, 5-8-1, 6-8-1
Ademco Contact ID
SIA DCS
Comments
Token, see above
Nothing is sent
Appendix
281