Abus SECVEST FUAA50 Series Installer Manual page 192

Configuration
Name/function
Service Centre Tel.
Own Telephone No
192
Explanation (checkbox)
Enter the number to dial for the service centre (F-SMSC) given to you.
The service centre number and protocol must correspond.
Contact your service provider's technical support.
When enquiring after the number of the service centre, ask which protocol it sup-
ports.
Store the service centre number (number of the SMS service centre for SMS mes-
sages from the landline).
The country-specific numbers can be found in the appendix "SMS notifications".
Note
To send SMS messages from the GSM/wireless mobile network (starting from the
wireless mobile module) the number of the SMS service centre for the network op-
erator in question is already stored on the SIM card.
You can check the number stored there using a mobile phone if necessary. A selec-
tion can be found in the appendix "SMS notifications", second part.
Some SMS service centres or protocols require the calling number before they ac-
cept a processing request for an SMS message. (This is also used for clear invoic-
ing of SMS messages.) Enter the Secvest landline number here.
Only available when one of the following UCP protocols has been selected in the
dropdown menu:
 UCP 8N1
 UCP 7E1