Abus SECVEST FUAA50 Series Installer Manual page 242

Appendix
Security to prevent removal
Information security
Monitoring a/b, Ethernet and GSM/wireless
mobile
Handshaking procedure
SW >= 3.00.06
Function
mobile communication module, mobile radio
module, cellular module, mobile service mod-
AES/NSL reporting (DTMF and FSK-based)
AES/NSL reporting (IP-based, e.g.DC-09)
Emergency call (DTMF-based)
Voice dialler (analogue)
Voice dialler (VoIP/SIP)
Voice dialler (VoLTE)
2-way communication
Remote Control by Phone
SMS
E-mail (with photos)
E-mail (without photos)
Web server
DynDNS ABUS Server
SNTP (time synchronisation)
IP camera
Smartphone app
Push messages
242
There is no method for achieving compliance with EN 50136-
1:2012, 6.7.3 (non-availability of the alarm transmission system)
because A0, no requirement.
S0 (no measures) -> SP2 (optional)
There is no method for achieving compliance with EN50136-
1:2012, 6.7.2 (redundancy) because S0, no measures
I0 (no measures) -> SP2 (optional)
There is no method for achieving compliance with EN 50136-
1:2012, 6.8.3 (information security) because I0, no measures.
See the Communication options chapter in the Installer manual.
Installer mode -> Communication -> Comm. options -> Comm.
path fault response
Installer mode -> Communication -> Comm. options -> Comm.
path fault delay
Mode/procedure:
PSTN
a/b
ule, cellular module
or connection
yes
no
yes
yes
no
no
yes
yes
yes
no
no
no
no
no
no
no
no
Ethernet, PSTN (a/b), GSM/mobile
Ethernet, PSTN (a/b), GSM/mobile
Transfer
(EN 50136-2 Section 6, Operation)
Ethernet
LAN
LAN
no
yes
no
no
yes
no
yes
no
no
yes
yes
yes
yes
yes
yes
yes
yes
2G 4G
GSM, GPRS LTE
ESMO50000 ESMO50000
FUMO50001
FUMO50000
yes no
yes yes
yes no
yes 2G fall back
no no
no no
yes 2G fall back
yes 2G fall back
yes 2G fall back
no yes
yes yes
no no
no no
yes yes
no no
no no
yes yes