Abus SECVEST FUAA50 Series Installer Manual page 113

Note
The default factory settings values are contained in the Appendix.
Option Effect
User Deletes all users, including their codes, proximity tags, remote
controls, panic alarms, medical emergency transmitters and
emergency call buttons.
After the reset you will be prompted to enter a new installer
code and a new administrator code.
This option has the same effect as using "Code Reset Pins" .
See Chapter "Device overview -> Device rear" for more details.
Zones Resets all zones; type, partitions and attributes.
In wireless zones, the alarm panel holds the IDs of all detectors
that have already been taught in in the alarm panel.
Wireless com- Deletes the IDs of taught-in wireless components. Scroll
ponents through the list of components and select Yes for every type
that you want to delete. Then press OK to confirm your selec-
tion.
All components
Detectors
Ext. Sirens
Int.Sirens
Wireless control panel
WAM
Door locks
RF repeater
Outputs Resets all outputs; type, partitions and attributes.
Activations Resets all activations, e.g. output mode.
This applies to the "Partitions" menu and the "Time schedules
active/inactive" user menu.
Resets all options in the "System" menu.
System
Resets all options in the "Configuration" user menu.
Note
Not reset in the "Configuration" user menu:
 Activity monitor
 Remote controls
 Web Access
Deletes all taught-in wireless components
Deletes only these components.
The zones are also reset.
Deletes only these components.
Deletes only these components.
Deletes only these components.
Deletes only these components.
Deletes only these components.
Deletes only these components.
Configuration
113