Abus SECVEST FUAA50 Series Installer Manual page 23

Access level 1–4
Access level 1-4, also known as level 1-4,
In accordance with
EN50131-1 Section 8.3.1
EN50131-3 Section 8.3.1
EN50136-2 Section 5.2
EN50136-3 Section 6.2
Access level 1
Access for all
Access level 2
User access, e.g. via a controller
Access level 3
User access, e.g. via personnel from a security
company
Access level 4
User access, e.g. via the device manufacturer
Note:
In the event of changing operating software, ac-
cess level 4 is applied, without activating a tam-
pering device on the alarm control panel or the
additional operating device.
Force Set
Zones with this attribute, if opened, are automatically
omitted when the alarm system or a partition is armed.
Introduction
23