Abus SECVEST FUAA50 Series Installer Manual page 262

Appendix
GSM/mobile
Voice dialler
SMS
Email
Zone Resistances
Panel PSU
Ext. DC voltage in
Panel Battery 1
Panel Battery 2
Aux. Voltage Out
8. LOG
All Events
Mandatory Events
Non-Mand. Events
Save
Print
9. INFO
Alarm panel
Version
Customisation
Communication
PSTN
GSM/mobile
Network
IMEI
Subscriber Number
IMSI
Version
Reset
Ethernet
IP address
IP Subnet Mask
Gateway IP address
DNS primary IP ad-
dress
MAC address
IP Link Status
262
No Recipients!
Comms not enabled
Comms not enabled
Comms not enabled
No Zones in use
e.g. 14.2 volts
e.g. 8.3 volts
e.g. 0.1 volts
e.g. 13.9 volts
e.g. 13.210.11.07.00
Only appears when a wireless mo-
bile module is installed.
Voltage value only appears if an ex-
ternal PSU is connected.
Only available on the WEB interface
Only available on the WEB interface
Shows S/W version, S/N, Part No.
and Language.
Shows code for customer-specific
alarm control panel adjustment.
Only appears when a wireless mo-
bile module is installed.
Shows mobile network provider and
SS (signal strength)
Modem firmware from wireless mo-
bile module