Abus SECVEST FUAA50 Series Installer Manual page 315

The telephone report from the ARC reporting via a/b (PSTN) or GSM/wireless mobile
Note
There is no communication protocol in relation to DC-09 (ARC/ESCC IP transfer).
If you would like to produce a trace of the ARC/ESCC IP transfer, please use a corresponding network tool,
e.g. Wireshark. Some routers can also be used to produce network recordings. In turn, you can use Wireshark
for the evaluation.
X = 4 = HTTPS client
The communication protocol between the alarm control panel and the ABUS server.
X = 5 = HTTPS server
This view shows a snapshot recording every five seconds of the currently active HTTPS connections on the
web server.
Example of a snapshot:
00001286.98:< # 4 | up 4 | idle 1 | host 192.168.1.204:10510 | system/partitions _=1432112428380
00001286.98:< # 3 | up 4 | idle 3 | host 192.168.1.194:54252 | logs--1
00001286.98:< # 2 | up 4 | idle 3 | host 192.168.1.194:53100 | system/partitions-2/zones
00001286.98:<HTTP(S) stats 00:21:28
It shows

How long the TCP connection was (in seconds)

How long the TCP connection was idling (in seconds)

Host IP and port

The requested file names, path and query string.
X = 6 = SNTP
The communication protocol between the alarm control panel and the NTP server.
Example
>***Timesync from ntp.exnet.com***
S/W >= v3.00.03
X = 0 = GSM / wireless mobile (e.g. "GSM – HUAWEI MG 323-B" or "plug-by")
See above
X = 1 = Email
See above
X = 2 = VoIP SIP
See above
X = 3 = Telephone call
See above
X = 4 = HTTPS client
See above
X = 5 = HTTPS server
See above
X = 6 = SIA-IP (DC-09)
The communication protocol between the alarm control panel and ARC/ESCC. The actual DC-09 messages
are listed in ASCII notation. The display of the DC-09 messages is similar to that in the examples in chapter
"Appendix B: Example Message Frames" of the DC-09 specification.
>A38700b6"*SIA-DCS"0013L0#7128[c499a115.......]....
Note
Appendix
315