Abus SECVEST FUAA50 Series Installer Manual page 135

Tamper Omit
If the Level 4 code is then used for accessing the alarm control panel, only
the following menu options appear
Level 4 User Name
Level 4 User Code
to allow the user to change the name and code.
See "S/W Upgrade" appendix. You will find details about the S/W upgrade
process there.
If a user omits a zone, it may be necessary to also omit the associated tamper
circuit for this zone.
Enabled
The tamper contact is also omitted within an omitted zone.
Deactivated
The tamper contact continues to be monitored within an omitted zone.
Configuration
135