Abus SECVEST FUAA50 Series Installer Manual page 243

Other
Configuration
Declarations of compliance
for the FUAA50000, FUAA50500, FUAA50010, FUAA50510, FUAA50100, FUAA50600, FUAA50110 and
FUAA50610 Secvest wireless alarm panel systems.
Standards with which the alarm panel claims compliance
EN50131-1:2006+A1:2009
EN50131-3:2009
EN50131-5-3:2005+A1:2008
EN50131-6:2008+A1:2014
EN50131-10:2014
EN50136-2:2013
INCERT TO31 2014 edition
Security level: Level 2
Environmental class: Class II
If the alarm panel has been installed correctly, the Secvest will be compliant with EN50131 Grade 2.
The Secvest is compliant with EN50131-1 and EN50130-5 environmental class II.
Power supply is compliant with EN50131-1:2006+A1 2009 Section 9 and EN50131-6 if the alarm panel has been in-
stalled correctly.
The alarm transmission system (ATS) is compliant with EN 50136-1:2012 as an SP2 communicator.
At Grade 2 the integrated SP2 communicator provides a compliant communicator for the Secvest
on the condition that
a) it is installed as specified in the installation instructions
b) the connected PSTN, LAN and GSM/wireless mobile work normally,
c) the alarm receiving centre has the right equipment.
The wireless mobile module (for Types see Technical Data -> Communication) can be used as an optional communi-
cator for Grade 2.
S/W >3.00.06
TE Primary Network Interface
TE Replacement Network In-
terface
The alarm panel supports options A, B and C for grade 2 as given in Table 10 in EN50131-1:2006+A1:2009.
If the installer selects a non-compliant configuration the compliance label must be removed or corrected.
Third party verification of compliance was carried out by ANPI.
Web browser via the integrated web server or directly on the alarm panel
Option 1
Communicator
mobile communication module, mobile
radio module, cellular module, mobile
service module, cellular module
Variant 2
mobile communication module, mobile
radio module, cellular module, mobile
service module, cellular module
Communicator
Appendix
243