Abus SECVEST FUAA50 Series Installer Manual page 241

Nursing emergency call
Receiver
Protocols
Voice dialler
Receiver
DTMF detection VoIP/SIP
Acknowledgement
Codec VoIP/SIP
SMS
Receiver
PSTN SMS protocols
Email
Receiver
Remote control by telephone
ATS Alarm transmission system
Categories and classifications
ATS (Alarm Transmission System) categories,
SPT (Supervised Premises Transceiver) clas-
sification
Classification of transmission time
Transmission time, maximum values
Classification of notification time
Classification of availability
SMS-based
CID in SMS
IP
Compatible with "SIA IP Reporting (TCP-2013)"
DC-09 (SIA-IP), with Fast Format, Contact ID, SIA
Protocol
FF
CID
SIA 1, SIA 2,
SIA 3, Ex SIA 3,
Ex SIA 3 V2, Ex
SIA 3 V3
TCP, only unencrypted (S/W<=3.00.03), unencrypted and
encrypted (S/W>=3.00.03)
Note:
For details, see the appendix entitled "ARC (ESCC) re-
porting protocol formats"
2 Tel
DTMF-based
Scancom, Scanfast, Tunstall
8 Tel or VoIP/SIP ID
RFC 2833
PCM G711 A law (RTP AV Profile 8)
ITU-T G.711 PCM A-Law audio 64 kbit/s
Reference RFC 3551
8
TAP 8N1
TAP 7E1
UCP 8N1
UCP 7E1
ETSI Protocol 1
8
Yes
The alarm panel contains an integrated SP2 (ATS2) communica-
tor to fulfil the requirements of EN50131 for security grade 2.
The alarm transmission system is compliant with EN50136-1:2012
as an SP2 (ATS2) communicator.
The alarm panel supports options A, B and C for grade 2 as given
in Table 10 in EN50131-1:2006+A1:2009.
D2 -> SP2
M2 -> SP2
T2 -> SP2
A0 (no requirement)-> SP2 (optional)
Token
"SCN-S8"
"ADM-CID"
"SIA-DCS"
Appendix
241