Router, Iad, Firewall - Abus SECVEST FUAA50 Series Installer Manual

Appendix
As required for DC-09, time stamps refer to GMT.
X = 7 = SNTP
The communication protocol between the alarm control panel and the NTP server.
Example
>***Timesync from ntp.exnet.com***
X = 8 = PPP
Point-to-Point Protocol
Mainly for mobile transmission
X = 9 = Cloud Connection
The communication protocol between the alarm control panel and the ABUS cloud.
Example:
>Panel ID: U0yVq7k.....
X = 10 = System (S/W >= v3.01.01)
10 = Press the "Up" menu key
This view displays system errors

Router, IAD, Firewall

ARC/ESCC reporting and DC-09
Note
The TCP internet protocol is used for the transmission. TCP uses port 9999.
If it is not possible to send messages, it may be that the firewall has also blocked various outgoing ports. Therefore,
check the firewall settings on the router/IAD.
TCP port 9999 uses the Transmission Control Protocol. TCP is one of the main protocols used in TCP/IP networks.
TCP is a connection-based protocol; it requires handshakes to set up end-to-end communication. Only once a connec-
tion has been established can user data be sent bidirectionally via the connection.
Note: TCP guarantees the delivery of data packets to port 9999 in the order in which they are sent. Guaranteed com-
munication via TCP port 9999 is the main difference between TCP and UDP.
316