Abus SECVEST FUAA50 Series Installer Manual page 204

Configuration
Name/function
Call-in
Control
Rings to Answer
(only when "Call-in control" is
activated)
Answer after first ring
(only when "Call-in control" is
activated)
204
Explanation (checkbox)
Note
For more information on the key combinations on the telephone and the corre-
sponding functions, see Chapter 11.4 "Operation via telephone" in the user manual.
Enabled
When this option is activated, the user can call the alarm system remotely.
After the user has sent an access code to the wireless alarm panel in order to iden-
tify themselves, they can send commands using the telephone keypad.
Deactivated
When this option is deactivated, the user can no longer call the alarm system re-
motely.
Select when the wireless alarm panel answers a call.
 3 rings
 5 rings
 7 rings
 10 rings
 15 rings
 255 rings
Note
If the value is set to 255, the alarm panel never answers the call.
Enabled
If the function is activated, the dial-in for remote configuration runs in stages.
The telephone dials the alarm system, rings twice and establishes the connection.
The alarm panel is activated by this call.
The wireless alarm panel answers the next call immediately, provided this call oc-
curs within 10 to 90 seconds. The "Rings to Answer" function is overridden in this
case.
Deactivated
If this function is deactivated, the "Rings to Answer" function takes over from the
first call.