Abus SECVEST FUAA50 Series Installer Manual page 259

Restorals
Burg Comms Rearm
21CN Ack Time
Send Tamp As Burg
Dynamic Auto Report
Stat. Auto Report
Unset Comms
Nursing emergency call
Call Mode
Protocol
Telecoms Priority
Receiver
Account Numbers
Call Acknowledge
21CN Ack Time
Voice dialler
Call Mode
Telecoms Priority
Messages
Event
Message 1
Message 2
Message 3
Enabled
Enabled
800 ms
Disabled
Enabled
Disabled
Enabled
Disabled
Scancom
PSTN 1
None
Account number for sub-area 1:
000000
Account number for sub-area 2:
000000
Account number for sub-area 3:
000000
Account number for sub-area 4:
000000
Enabled
800 ms
Disabled
Ethernet 2
PSTN 1
None
None
Event 1: None
Event 2: None
Event 3: None
Event 4: None
Event 5: None
Event 1: None
Event 2: None
Event 3: None
Event 4: None
Event 5: None
Event 1: None
Event 2: None
Event 3: None
Event 4: None
Only appears if protocol = Fast For-
mat AND if confirmation mode =
"Basic"
Only appears if protocol = Fast For-
mat.
Only appears if protocol = CID or
SIA.
Only appears if Static Test Call disa-
bled
Only appears if Dynamic Test Call
disabled.
To be compliant with EN50131, ei-
ther the static or dynamic test call
must be enabled.
One account number per partition
Only appears if protocol = Scancom
or Scanfast
Appendix
259