Abus SECVEST FUAA50 Series Installer Manual page 311

The restart is displayed as shown below.
Picture: Neustart_Zentrale_3
After the restart you are automatically logged out of the web server. If you wish to continue working on the
web server, please log in again with your user name and password.
[3] Alarm control panel –
Hold down the "Up" and "Down" navigation keys simultaneously for longer than five seconds.
Installer in installer mode:
If the "Up" and "Down" navigation keys are held down simultaneously for longer than five seconds the alarm
panel is restarted immediately.
Administrator in the user menu:
If the "Up" and "Down" navigation keys are held down simultaneously for longer than five seconds the alarm
panel is restarted immediately.
Alarm panel in standby mode:
If the "Up" and "Down" navigation keys are held down simultaneously for longer than five seconds an access
code entry screen appears.
Once a valid installer code or administrator code has been entered and subsequently confirmed with "Yes" the
alarm panel is restarted.
Note
SSL certificate will be created, this can take several minutes.
Network functions are not available during this time.
Note
This message will display: Network initialisation, please wait...
"Up" and "Down" navigation keys
Appendix
311