Abus SECVEST FUAA50 Series Installer Manual page 298

Appendix
"Alarm CONF CDV=="
"Alarm CONF bell #"
"Alarm sound generator"
"Alarm CONF siren =="
"Alarm CONF WAM =="
"AlarmCONF Z=="
"Alarm CONF panel lid"
"Alarm CONF aux"
"Alarm confirm"
"Alarm CONF RPT=="
"Alarm CONF panel jam"
"Log in"
"ATE L.F. All"
"ATE L.F. Single"
"ATE L.F. Restore"
"Auto Part Set #"
"Auto System Unset"
"Auto System Set"
"Auto Ptn # Set"
"Auto Ptn # Unset"
"Autoset off Ptn #"
"Autoset on Ptn #"
"Autoset defer U--"
"AS defer U-- P#"
"Autoset off"
"Autoset on"
"Autoset Fail P#"
"Auto Ptn # PtSet"
"Aux # Tamper Rstr"
"Aux. 14V4 # Fail"
"Aux Tamper Rstr"
"Aux # Tamper"
"Aux 14V4 # Rstr"
"Aux Tamper"
"U-- Sys. PtSet #"
"U-- Set Override"
"U-- Download Fail"
"U-- Config Change"
"U--- PtSet # Exit"
"U--- Medical Alm"
"U-- Panel Restart"
"U--- Duress Restr"
"U--- Duress"
298
Confirmed alarm wireless control panel ==
Confirmed alarm sounder#
Confirmed alarm sound generator
Confirmed alarm siren ==
Confirmed alarm WAM ==
Confirmed alarm zone ===
Confirmed alarm control panel tampering
Confirmed alarm connected accessories
Confirmed alarm
Confirmed alarm repeater
Confirmed alarm control panel jamming
Logged in to the web server
All alarm transmission unit lines are faulty
One alarm transmission unit line is faulty
All alarm transmission unit lines are repaired
System # internally automatically activated
System automatically deactivated
System automatically activated
Partition # automatically activated
Partition # automatically deactivated
Autoset partition # is disarmed
Autoset partition # is activated
Autoset was shunted by user --
User -- has delayed autoset of partition #
Autoset is switched off
Autoset is switched on
Autoset partition # is faulty
Partition # internally automatically activated
Tampering with the power supply, external device # reset
Alarm panel 14 V output faulty
Tampering with the power supply, external device reset
Tampering with the power supply, external device #
Alarm panel 14 V output OK
Tampering with the power supply, external device
User -- has part set the system
User -- has cancelled system activation
User == download failure
The configuration was == changed by the user
User -- has started the output delay from output #
Medical emergency alarm triggered by user --
User -- has restarted the alarm control panel
Duress alarm from user == reset
Duress alarm from user ==