Configuration
Email
224
PSTN
When this is selected, the possible configured recipients are displayed with their contact
names as stored in the phone book.
Scroll to the desired contact. Press the "Select" or "Start" key in the web interface.
The alarm panel sends a test text message to this recipient.
GSM / Mobile
When this is selected, the possible configured recipients are displayed with their contact
names as stored in the phone book.
Scroll to the desired contact. Press the "Select" or "Start" key in the web interface.
The alarm panel sends a test text message to this recipient.
The recipient receives an SMS in the following form:
<Home Message>: 10:56 21/01/2015 SMS Test Call
During the test call a series of progress messages appear on the display.
If the test call was not successful, the display shows a brief message with the
cause of the error.
Email must be activated and the contact must be saved in the phone book.
Installer Mode->Communications->Email->Call Mode->Enabled
A list of the available connected transmission paths can be seen (on WBI only):
Ethernet, Ethernet / IP Mobile
When this is selected, the possible configured recipients are displayed with their contact
names as stored in the phone book.
Scroll to the desired contact. Press the "Select" or "Start" key in the web interface.
The alarm panel sends an email to this recipient.
The recipient receives an email in the following form:
Subject:
<Home Message>: Email Test Call
Text:
<Home Message>:
11:09 21/01/2015 Email Test Call
During the test call a series of progress messages appear on the display.
If the test call was not successful, the display shows a brief message with the cause of the
error.