Call-Forwarding Via Call-Forwarding Key; Delayed Call-Forwarding (Hipath 4000) - Siemens HiPath 4000 Operating Instructions Manual

Forwarding calls
Step by Step
Call forwarding
Call forwarding
Call forwarding
38

Call-forwarding via call-forwarding key

Call-forwarding keys for all call-forwarding modes (see
Table ! page 36) can also be installed by the system
administrator. When programming the call-forwarding
destination, enter the destination call number too.
Programming and activating call-forwarding
n
Lift the handset.
Press the call-forwarding key. The lamp comes on.
p
Enter the destination call number.
r
Enter the terminating character. You should hear a con-
firmation tone – call-forwarding has then been activa-
ted.
t
Replace the handset.
Activating fixed call-forwarding
n
Lift the handset.
Press the fixed call-forwarding key. The lamp comes on.
t
Replace the handset.
De-activating call-forwarding
Press key. Lamp goes out.

Delayed call-forwarding (HiPath 4000)

Installed for the whole system by the system administ-
rator.
Requirements: Waiting call must be installed
(! page 12).
If you have activated "call-forwarding on busy / timed "
or "timed call-forwarding" on your telephone (see Table
! page 36), you will automatically obtain a camp-on
busy tone if there is a waiting call. This gives you the op-
portunity to take the call before it is forwarded (say you
are waiting for an urgent call).
A calling party hears the ringing tone and is only forwar-
ded to another telephone when the time that has been
set elapses.