Operating the Telephone with the Display
Step by Step
The Telephone rings giving the set call signal
If calling party information (name, number, or both) is
transferred, it appears in the display.
If you are defining settings on the telephone
when a call arrives, the process is paused. Af-
ter the telephone conversation, the telephone
automatically returns you to the point in the
menu structure you were in before the call.
incoming pickup group calls.
Answering a Call With the Handset
Lift the handset.
Set call volume. To raise or lower the volume, press the
relevant key until the desired volume is set.
Answering a Call Without the Headset
You can't use this function with optiPoint 410/
420 economy/economy plus
The telephone rings. The caller is displayed on the
Press key. LED lights up.
Adjust volume. To raise or lower the volume, keep
pressing the keys until the desired volume is set.
Notes on speakerphone mode:
Tell the other party that you are using speakerphone
The speakerphone works bests at a low receiving
page 52 for information to answer