Answering A Call Via The Loudspeaker (Speakerphone Mode); Accepting A Call Via The Headset; Switching To Speakerphone Mode - Siemens HiPath 2000 User Manual

Basic functions
Step by Step
M0066Answer
+
if nec.
+
if nec.
34
Answering a call via the loudspeaker
(speakerphone mode)
Suggestions for using speakerphone mode
• Tell the other party that you are using speakerphone
mode.
• The speakerphone works bests at a low receiving
volume.
• The ideal distance between the user and the tele-
phone set in speakerphone mode is about 50 cm
(approx. 20 inches).
The phone is ringing. The caller appears on the screen.
Pay attention to the notes on voice encryption
page 86.
n
Press the key shown. The LED lights up.
or
Confirm.
The speakerphone function is activated.
-
or Set the call volume. Keep pressing the key until the de-
sired volume is set.
Ending a call
n
Press the key shown. The LED goes out.
or
s
Press the key shown.

Accepting a call via the headset

Prerequisite: A headset is connected.
Make sure your headset port is set up properly
The phone rings. The
o
Press the key shown.
-
or Set the call volume.

Switching to speakerphone mode

Prerequisite: You are conducting a call via the handset.
n \
Hold down the key and replace the handset. Then re-
lease the key.
page 132.
o
key flashes.