Table of Contents
Advertisement
Commissioning and configuration
The configuration is now transferred to the external parameter memory and is from now on
updated immediately when the configuration is changed via display or online commands.
Replacing a defective BCL
Uninstall the defective BCL
Remove the external parameter memory from the defective BCL
unscrewing the tube with the three red rings.
Mount the external parameter memory onto the new BCL
Install and commission the new BCL
The following message appears on the display again:
Memory stick connected:
Export internal
configuration?
OK
cancel.
Attention!
Make sure you select Cancel . Otherwise, the configuration in the external parameter mem-
ory is lost!
The configuration is now imported from the external parameter memory and the
i
BCL 500
\ BCL 501
122
The display of MS under the device address indicates that
31
the USB memory stick is connected correctly and is func-
tioning.
MS
500i
\ BCL
500i
\ BCL 501i.
500i
Use the arrow keys
press the enter button
i
is immediately operational without any further configuration.
i
BCL 500
\ BCL 501
501i
500i
\ BCL 501i.
to select Cancel and then
.
i
500i
\ BCL
501i
by
\ BCL 501i.
Leuze electronic
Advertisement
Table of Contents
