Leuze webConfig tool
9.3
Starting the webConfig tool
To start the webConfig tool, click the BCL 50xi icon
that the BCL 500
is connected.
Or alternatively: Open a browser on your PC and enter the following address:
192.168.61.100
This is the default Leuze maintenance address for communication with barcode readers of
the BCL 500
In both cases, the following start page appears on your PC.
Figure 9.2:
Notice!
The webConfig tool is completely contained in the firmware of the BCL
pending on firmware version, the start page may vary from that shown above.
The individual parameters are – where useful – graphically displayed in order to better illus-
trate the meaning of the what are often perceived as abstract parameters.
The result is an easy-to-use and practically-oriented user interface!
106
i
\ BCL 501
i
is connected to the PC via the USB interface and that voltage
i
series.
The start page of the webConfig tool
BCL 500
located on the desktop. Make certain
i
i
\ BCL 501
500i
\ BCL 501i. De-
Leuze electronic