Maintenance
14
Maintenance
14.1
General maintenance information
Usually, the barcode reader BCL 500
operator.
Cleaning
In the event of dust build-up, clean the BCL 500
agent (commercially available glass cleaner) if necessary.
Notice!
Do not use aggressive cleaning agents such as thinner or acetone for cleaning the device.
Use of improper cleaning agents can damage the optical window.
14.2
Repairs, servicing
Repairs to the device must only be carried out by the manufacturer.
Contact your Leuze distributor or service organisation should repairs be required.
The addresses can be found on the inside of the cover and on the back.
Notice!
When sending devices to Leuze electronic for repair, please provide an accurate description
of the error.
14.3
Disassembling, packing, disposing
Repacking
For later re-use, the device is to be packed so that it is protected.
Notice!
Electrical scrap is a special waste product! Observe the locally applicable regulations re-
garding disposal of the product.
148
i
\ BCL 501
i
does not require any maintenance by the
i
\ BCL 501
i
i
BCL 500
\ BCL 501
i
with a soft cloth; use a cleaning
Leuze electronic