Leuze electronic BCL500i Technical Description page 116

Interface standard and communication parameters of the host interface
Select the desired interface standard (RS 232 / RS 422) and set the associated commu-
nication parameters:
• Via webConfig:
Configuration -> Communication -> HOST/BUS IN -> Data transmission
• Or, alternatively, via the display
Parameter
Parameter handling
Decoder table
Digital SWIO
o Com
Com
Operating mode
o HOST/BUS IN
BUS OUT
HOST / BUS IN
Protocol type
o Interface
Framing protocol
Interface
o Baud rate
Data format
Handshake
Standard
Leuze electronic
Commissioning and configuration
1
In the Parameter menu, use the
select the Com menu item.
Press the enter button to enter the Com menu.
Use the
menu item.
Press the enter button to enter the HOST/BUS IN
menu.
Use the
item.
Press the enter button to enter the Interface menu.
Press the
ting the interface parameters. Select the available
parameters one after another and set them to the
values you require. The various settings are
described beginning on page 99.
i i
BCL 500 \ BCL 501
buttons to select the HOST/BUS IN
buttons to select the Interface menu
enter button to enter the menu for set-
buttons to
113